The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job. The discs go from 18mm.7 inches) all the way to 65mm ( inches) in 1mm increments plus 74mm ( inches). All discs are connected with a 12mm inches) shaft and screw which quickly connects to a mm /5.
Shankly Bushing Removal Tool, Bushing Driver Set, 50 Piece Seal Drive Set All 4 trucks were 's with roughly kK on factory bushings, 48 state trucks with winter and salt exposure. but the distance between the bolts needs to be wider toaccomadate for the curl of the spring it works well on newer springs but on springs that have /5(23). The Sierra Shift Shaft Bushing Tool is interchangeable with the following: GLMMercury T,T,Each Sierra product meets or exceeds the original equipment part it replaces.
Sierra Shift Shaft Bushing Tool. Meets or exceeds the original equipment quality. Sierra part number: /5(13). PRODUCT DESCRIPTION.
Fits A, B/RB & Gen II Hemi Engines. Installs the lower distributor driveshaft bushing into the engine block and subsequently reams in a snap. simply tighten down to install the bushing and spin the tool on the way out for a clean ream. State Road Winter Springs, FL USA bushing and onto the axle. Note the thin Teflon washers and reinstall them as they were factory placed.
Reassemble everything, making sure output shaft. You can use a mm hex wrench to check the security of the.